Numericon 850 a.k.a Micon 850 Postprocessor, Looking for Numericon 850 postprocessor Options

[Valentin]

I recently got an old Hartford vertical mill with a Numericon 850 controller.
The Numericon was originally made by Conlog and later purchased by Micon (UK).
Any idea where can I find a post for it before messing with the generator?

[Sprut_UK]

I've checked my list of posts and also Sprut Russia's and have not found one specifically for your control.
If nobody else has one, it's probably best to either contact your local SprutCAM reseller or Sprut Russia directly for assistance, or have a go yourself at modifying one of the standard posts.
Post a question up on here if you get stuck. I'm sure there are some other SprutCAM users who will also be willing to help........

Dave

[dermot]

I recently got an old Hartford vertical mill with a Numericon 850 controller.
The Numericon was originally made by Conlog and later purchased by Micon (UK).
Any idea where can I find a post for it before messing with the generator?

I have a matchmaker cnc mill with a numericon 850 controller,I need advise on downloading programes to the machine,here are some questions i have
Q1;WHAT IS THE CONFIGURATION OF THE 25 PIN RSJ CONNECTION
Q2;WHAT DO I USE ON THE CONTROLLER TO RECIVE THE PROGRAME
Q3;WHAT IS TH POST PROCESSOR CONFIGURATION FOR THIS MACHINE
Dermot