anafranil online
IPB

Welcome Guest ( Log In | Register )

> maho 800C postprocessor
breazr
post Jun 7 2007, 06:59 AM
Post #1


Member
**

Group: Members
Posts: 22
Joined: 12-December 07
From: Romania
Member No.: 40



Hello all,

I'm from the Romanian reseller of SprutCAM.

These days I have to deal with a MAHO 800C machine with a Heidenhain TNC control. I have no ideea what kind of TNC it is because the owner didn't have any manuals at all.

I tried to run some tests in order to figure out how the controller works (linear, circular interpolation) but the owner didn't allow me to stop its production more than 20 mins (he has some hard production dealines to meet).

So, the conclusion is:
- it is like a TNC 151, but the circular interpolation does not work like that
- the closest post-processor from SprutCAM its the MahoHem232, but there are some differences (the main one is that MahoHem232 uses X Z instead of X Y axes, but that is easy to modify).

After this long introduction, here comes my cry for help smile.gif

Does anybody worked with this machine and developed a post-processor for it ?

Of course, I'm ready to start working to develop a new one, but hopefully someone just did that before.

Thanks in advance.

Radu
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 18th July 2019 - 08:09 PM