Printable Version of Topic

Click here to view this topic in its original format

SprutCAM forum _ SprutCAM 2007 _ New Releases coming?

Posted by: djb Sep 25 2009, 06:26 PM

Dave,

Any news on upcoming revisions of Sprutcam? When is the next release scheduled and are there any new features coming?

David

Posted by: Sprut_UK Sep 25 2009, 07:23 PM

QUOTE (djb @ Sep 25 2009, 07:26 PM) *
Dave,

Any news on upcoming revisions of Sprutcam? When is the next release scheduled and are there any new features coming?

David


Hi David, they are finalising the new version SprutCAM 7 right now......just crossing the t's and dotting the i's. I've been testing it for the last month and it's looking very nice.
New features.....well I don't want to spoil any surprises.......but there is a new optional Wire EDM module......a new Rotary machining operation, Machining result model calculation will be lightening fast as will the toolpath calculation times............
We expect the release to be end of October early November.

Dave

Posted by: djb Nov 15 2009, 05:54 PM

QUOTE (Sprut_UK @ Sep 25 2009, 07:23 PM) *
Hi David, they are finalising the new version SprutCAM 7 right now......just crossing the t's and dotting the i's. I've been testing it for the last month and it's looking very nice.
New features.....well I don't want to spoil any surprises.......but there is a new optional Wire EDM module......a new Rotary machining operation, Machining result model calculation will be lightening fast as will the toolpath calculation times............
We expect the release to be end of October early November.

Dave


Dave, any news on the new version?? biggrin.gif

David

Posted by: Sprut_UK Nov 15 2009, 08:12 PM

Hi David, well, I've just finished re-translating the english manual for the new Wire EDM module, and I'm told that it should be launched next week..........fingers crossed smile.gif

Posted by: Live Nov 16 2009, 07:17 PM

SprutCAM 7 Highlights

1. Many times faster 3d-toolpath calculation on large models and STL files



2. Voxel Simulation method for Machining result calculation and Simulation mode


3. Power industrial strength freeform 4 axis rotary machining. 5 Axis machining with Collision Detection and Avoidance.

4. 5 Axis hole machining and thread milling

5. Machining features like Pockets and Slots in Job assignment of milling operations

6. 2 and 4 Axis Wire EDM machining

7. It is possible to save an operation with adjusted parameters as a template for a future use

8. Automatic selection of Feeds and Speeds from the tool database

9. Improvements in User Interface

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)